9
of the device.
Note: Locate the SIM card slot on the back of the device and
in the direction of the signal, with the collisions slide the card.
4.2. Insert a memory card
The memory card is not part of the basic package, but the
memory of the device can be expanded with an SD card.
Please make sure that the memory card is inserted correctly
before use.
Note that the device may shake, the memory card may slide
out of the slot, so please do not bend it, scratch the memory
card or expose it to static electricity or dust, do not immerse
it in water. Place the memory card in the slot on the back of
the machine, with a chip down, as shown on the device.
Please be careful when using a memory card, especially when
it is removed. Some memory cards must be formatted with a
computer before use.
4.3. Insert battery
1. Insert the battery chip into the protruding metal point in
the battery slot, insert the battery, and push the top down
until the battery engages in the recess.
2. Put back the back cover.
4.4. Remove the battery
To remove the battery, turn off the device, remove the cover,
and then remove the battery at the top.
Note:
Please remove the battery when it is switched off, as it may