Blaupunkt LIVERPOOL 110 User Manual

OPERATION
87.5MHz frequency and checks the signal
strength until one cycle search is finished.
And then some strong stations are stored
into the corresponding preset number
button. In the first cycle it will in LOCAL
mode to receive the stronger station. If it is
less than 18 pcs station it will searching
stations in 2
nd
cycle in LOCAL OFF mode.
- Program scanning
Press
AMS button (20) shortly to scan
preset station. The radio is holding at
that preset number for several seconds
with release mute, then searches again.
 MANUALLY STORE STATION & R ECALL
PRESET STATION
To received a station, Press one of the
preset button (1~6) for 2 seconds. The
current station is stored into the number
button. Shortly press the preset button
(1~6) to directly listen the station that
saved in the corresponding preset button.
RDS (RADIO DATA SYSTEM)
OPERATION
- Setting RDS mode
Press
AF button (7) to switch on or off AF
function.
Whenever AF is on, symbol “
AF ” appears
on the display.
Program name is displayed on receiving
aRDSstation.
“
AF ” starts blinking if the broadcasting
signal getting worse.
“
ALARM ”willbedisplayedwhenan
emergency broadcasting is received,
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume control is
set at minimum.
- Regional Program Operation
When AF function is on. Press and hold
AF button (7) for 2 seconds to switch on or
off region mode. When AF function is off.
Press and hold
AF button no function.
Some broadcasting stations change their
program from normal broadcasting to
regional broadcasting for a certain time
period. When region is on, the current
listening program remains unchanged.
When region is off, it allows the reception
moves to the regional station.
- Listening to Traffic Announcement
Press the
TA button to turn on/off TA
function.
When
TA mode is on and a traffic
announcement is transmitted:
When the unit was in CD (MP3) or AUX IN
mode, it will switch temporarily to radio
mode.
Temporary switch over to an EON linked
stationwhenEONdetectsatraffic
announcement on that other program.
If the volume level was under the
threshold point it will be raised to the
threshold point.
When
TA mode is on, TA of individual
segment is turned on. When a TP station is
received, TP of individual segment is
turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing
TA key. But the TA
mode will not be off. which EON TA
information was received from
current station and the radio switched to
that EON linked station, but no
Information could not be received
because the EON linked station is
located too far from that area. So the
radio is switched back to current station
again. In above operation, a customer
listens to a wrong program or mute sound
for a while.
6

Blaupunkt LIVERPOOL 110 Specifications

General

Brand	Blaupunkt
Model	LIVERPOOL 110
Category	Car Receiver
Language	English