12
➮ Press the MENU button 9.
➮ Press the button 7 repeatedly
until “VOLUME MENU” appears in
the display.
➮ Press the OK button : to display
the volume menu.
➮ Press the or button 7 repeat-
edly until “AUTO SOUND” appears
in the display.
➮ Set the volume adjustment level
(0 - 5) using the
buttons 7.
When you have finished making your
changes,
➮ press the MENU button 9.
Note:
● The optimum setting (0 - 5) for the
speed-dependent volume adjust-
ment feature depends on how
noise levels develop in your partic-
ular vehicle. You will need to test
various settings in order to find out
which is best suited to your vehicle.
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears in the dis-
play as soon as the tuner receives it.
Switching to radio mode
If you are in CD/MP3, CD-changer or
AUX mode,
➮ press the FM•TS button 4 for FM
radio mode.
Or
➮ press the AM button = for AM ra-
dio mode.
RDS function (only FM)
The RDS function extends your radio’s
range of functions. If the RDS function
is activated, the device automatically
tunes into the best receivable frequen-
cy for the station that is currently set.
Switching the RDS function on/off
To use the RDS function,
➮ press the RDS button 3.
The RDS function is active when RDS
lights up in the display.
ADJUSTING THE VOLUME
RADIO MODE
To Next Page
Loading...
Need help?
General
