Blaupunkt MP54 User Manual

31
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
CLOCK time
Displaying the time
You can make the clock time appear
continuously in the bottom part of the
display while any audio source is acti-
vated. For further information, please
read the “Configuring the display” sec-
tions in the relevant chapters.
Setting the clock automatically
You can configure the system to set the
clock time automatically using the RDS
signal.
➮ Press the MENU button 9.
➮ Press the or button 7 repeat-
edly until “CLOCK MENU” appears
in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until “CLOCK AUTO” or
“CLOCK MANUAL” appears in the
display.
➮ Select the “CLOCK AUTO” setting
using the or button 7.
➮ Press the MENU button 9.
The menu appears again.
Setting the clock manually
To set the clock time manually,
➮ press the MENU button 9.
➮ Press the or button 7 repeat-
edly until “CLOCK MENU” appears
in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until “CLOCK SET” appears in
the display.
➮ Press the OK button :.
The time appears in the display.
The hours flash and can be adjusted.
➮ Set the hours using the / but-
tons 7.
Once the hours are set,
➮ press the button 7.
The minutes flash.
➮ Set the minutes using the /
buttons 7.
➮ Press the OK button : and then
the MENU button 9.
Selecting 12/24-hour clock
mode
➮ Press the MENU button 9.
➮ Press the or button 7 repeat-
edly until “CLOCK MENU” appears
in the display.
➮ Press the OK button :.
➮ Press the or button 7 repeat-
edly until “24 HOUR MODE” or
“12 HOUR MODE” appears in the
display.
➮ Press the or button 7 to
switch between the modes.
When you have finished making your
changes,
➮ press the MENU button 9.
CLOCK TIME

Blaupunkt MP54 Specifications

General

Brand	Blaupunkt
Model	MP54
Category	Car Receiver
Language	English