Blaupunkt Sydney 220 BT User Manual

24
Useful information
Warranty
We provide a manufacturer's warranty for prod-
ucts bought within the European Union. For de-
vices purchased outside the European Union, the
warranty terms issued by our respective responsi-
ble domestic agency are valid. The warranty terms
can be called up from www.blaupunkt.com.
Service
In some countries, Blaupunkt o ers a repair and
pick-up service.
Information about the availability of this service in
your country can be found at www.blaupunkt.com.
If you want to take advantage of this service, you
may request a pick-up service for your car sound
system via the Internet.
Technical data
Voltage supply
Operating voltage: 10.8 – 15.6 V
Current consumption
In operation: < 10 A
10 sec. after switch-o : < 2 mA
(Helsinki 220 BT and
Sydney 220 BT)
< 4 mA
(London 120 and
Melbourne 120)
Ampli er
Output power: 4 x 20 watts sine
at 14.4 V at 4 ohms
at 10 % THD.
4 x 45 watts max. power
Tuner
Wavebands in Europe/Thailand:
FM: 87.5 – 108 MHz
AM (MW): 531 – 1,602 kHz
Wavebands in the US:
FM: 87.7 – 107.9 MHz
AM (MW): 530 – 1,710 kHz
Wavebands in South America:
FM: 87.5 – 107.9 MHz
AM (MW): 530 – 1,710 kHz
FM frequency response: 30 – 15,000 Hz
CD
Frequency range: 20 – 20,000 Hz
Pre-amp out
2 channels: 2 V at THD < 1 %
Input sensitivity
Front AUX-IN: 300 mV / 10 kΩ
Dimensions and weight
W x H x D: 178 x 51 x 158 mm
(Helsinki 220 BT and
London 120)
178 x 51 x 102 mm
(Sydney 220 BT and
Melbourne 120)
Weight: 1.475 kg
(Helsinki 220 BT and
London 120)
0.725 kg
(Sydney 220 BT and
Melbourne 120)
Subject to changes
Useful information | Technical data

Blaupunkt Sydney 220 BT Specifications

General

Brand	Blaupunkt
Model	Sydney 220 BT
Category	Car Receiver
Language	English