8
Radio mode
Notes:
• Up to 5 stations (Helsinki 220 BT and Sydney
220 BT) or up to 7 stations (London 120
and Melbourne 120) can be stored in each
memory bank.
• Memory banks can be activated or deacti-
vated via the user menu (see the chapter
"User settings", section "Making settings
in the "TUNER" menu", menu item "TUN
BAND" (band selection)). Deactivated
memory banks are skipped during the
source selection with the SRC button
@
.
Tuning into a station
There are various ways of tuning into a station:
Tuning into stations manually
쏅 Brie y press the
/ button
7
once or
several times to change the frequency in in-
crements, or long to quickly change the fre-
quency.
Note:
For the reception areas "EUROPE" and "USA":
In the FM waveband, the current selected
programme type is displayed and can be
changed if the PTY function is activated (see
the chapter "PTY").
Starting station seek tuning
쏅 Press the
/ button
7
to start station
seek tuning.
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only tra c information stations
are tuned into if the priority for tra c infor-
mation (
) is switched on.
• For the reception areas "EUROPE" and
"USA": In the FM waveband, the next
station with the currently selected pro-
gramme type is tuned into if the PTY func-
tion is activated (see the chapter "PTY").
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SEEK SENS").
Storing stations or calling stored
stations
쏅 Select the desired memory bank.
쏅 If necessary, set the desired station.
쏅 Press a station button
>
for approx. 2 sec-
onds to store the current station under the
button.
- or -
쏅 Brie y press a station button
>
to call up the
stored station.
Scanning stations
The scan function is used to scan every receivable
station of the current waveband.
Note:
You can adjust the scan time for each sta-
tion (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu",
menu item "SCAN TIME").
쏅 Press the MENU button
2
for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
쏅 Brie y press the MENU button
2
to con-
tinue listening to the station that is currently
being received.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store the 5 FM stations (Helsinki 220 BT and
Sydney 220 BT) or the 7 FM stations (London 120
and Melbourne 120) o ering the strongest recep-
tion in the region in one memory bank, Any pre-
viously stored stations in this memory bank are
deleted in the process.
To Next Page
Loading...
Need help?
General
