41
ENGLISH
Bluetooth®
Press the button @ to select the "STREAM-
ING" menu item.
Press the
button > to register a stream-
ing device.
The display shows the currently stored PIN
(default "1234"). If required, enter the PIN of
the streaming device:
Press the button
@ / 2 repeatedly
until the desired number appears at the re-
spective current location.
Press the button
5 / > to change be-
tween the 4 locations of the PIN.
Press the MENU•OK
button ? to confi rm
the PIN entered.
Note:
Not all streaming devices require the entry
of a PIN on the car sound system. For some
streaming devices, you have to enter the PIN
of the car sound system instead. For those
devices, you can simply confi rm the current
PIN of the car sound system by pressing the
MENU•OK
button ? and then enter it on
the streaming device.
The display shows "PAIRING" and the Blue-
tooth® symbol is fl ashing. The car sound sys-
tem can now be recognised by the streaming
device for approx. 2 minutes and connected.
Search the car sound system from your
streaming device (Bluetooth® name: "TO-
RONTO 400 BT") and establish the connec-
tion. Enter the PIN of the car sound system,
if necessary.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the streaming device are registered
and connected.
Note:
If no connection can be established, "CON
FAIL" (connection failed) is briefl y displayed.
쏅
쏅
쏅
쏅
쏅
쏅
Telephone functions
Answering/rejecting an incoming phone call
With an incoming call, the display alternately
shows "INCOMING" and the number of the caller.
The current audio source is muted and a ring tone
is played via the loudspeakers of the car sound
system.
Note:
If the number of the caller is not being
transmitted, the display shows "PRIVATE
NUMBER" instead of the number. If the
number of the caller is stored together with a
name, the name of the entry and the number
are displayed (see the ch. "Storing a phone
number").
Press the
button B to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
Press the
button A to reject the call or
to end the current call.
The display shows "CALL END".
Making a call
In the Bluetooth® menu, select the "DIAL
NEW" menu item.
Press the
button >.
You can now enter a phone number with up
to 20 digits:
Press the button
@ / 2 repeatedly
until the desired number appears at the
respective current location.
Press the button
5 / > to change be-
tween the locations of the number.
Press the
button B to call the number
entered.
"OUTGOING" and the dialed number are alter-
nately shown on the display.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
02_Toronto400BT_gb.indd 4102_Toronto400BT_gb.indd 41 03.02.2009 16:04:23 Uhr03.02.2009 16:04:23 Uhr
To Next Page
Loading...
Need help?
General
Weight and Dimensions
