BLUM 21KA000 User Manual

© 2016 Blum, Inc. Subject to technical modifications without notice
16
Installation of SERVO-DRIVE activation switch
NOTE: Use of boring template (M31.2000) recommended, see page 27
The activation switch should be installed by pressing into the cabinet
side with your hand. Do not use hammer to install.
Installation of Blum distance bumpers
Install into door front. Use of four distance bumpers is recommended.
Two may be sufficient for smaller, lighter doors.
11
12
30 min. 90 max.
Ø35
8
3232
10 min.
*
Assembly for
AVENTOS HK
SERVO-DRIVE for
AVENTOS
Drive unit preparation
Before SERVO-DRIVE for AVENTOS installation, the lift mechanism
tension adjustment should be made and door operation balanced.
Depending on lever arm position, set drive unit accordingly.
Installation of universal cable
Lift orange universal cable lock lever Insert universal cable (either end of the
cable can be used)
Once cable is inserted, press down on
universal cable lock lever
1 2 3
2
1
1 2
3
75°

BLUM 21KA000 Specifications

General

Brand	BLUM
Model	21KA000
Category	Servo Drives
Language	English