NavigationEntertainment Driving tips
161
Reference At a glanceControlsCommunicationsMobility
Using iDrive
1. Select "SAT" and press the controller.
2. Choose the selection criterion and press
the controller.
> "Channels":
All channels are displayed.
> "Categories":
All channels are displayed, sorted
according to categories.
> "Presets":
Up to twelve channels that you have pre-
viously stored are displayed.
3. Select channel and press the controller.
Using the voice command system:
Select a stored channel:
Displaying additional information
Select the channel currently being played and
press the controller.
The name of the station, the name of the artist,
and the title of the track are displayed.
Notes
If no signal can be received for more than 4 sec-
onds, a message appears on the Control Dis-
play.
Reception may not be possible for certain
reasons, e.g. environmental influences or
topographical conditions. The satellite radio
has no influence on this.
The signal may not be available in tunnels or
underground garages, next to tall buildings,
near trees, mountains or other powerful
sources of radio interference.
Reception is usually possible again as soon as
the signal is available once more.<
Storing a station
1. Select "SAT" and press the controller.
2. Select "Channels" and press the controller.
3. Select the desired station.
4. Select "STORE" and press the controller.
The list of stored stations appears on the
display.
5. Select the desired station.
6. Turn the controller until you reach the
desired memory position.
{Satellite Radio} or {SDARS}.
> {Previous station} or {Next station}
> {Previous} or {Next}.
1. {Satellite Radio} or {SDARS}.
2. {Station 1...12}.
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG
To Next Page
Loading...
Need help?
General
