Everything under control
76
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 73
3 When the lights are on: instrument lighting
brightness 99
4 Calling up Check Control 81
5 Checking engine oil level 222
6 Setting the time 79
7 Setting the date 80
8 Viewing service requirement display 76
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
You can set units of measure.
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Language / Units" and press the
controller.
5. If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Units" is selected and press the con-
troller.
6. Select the desired menu item and press the
controller.
7. Select the desired measurement unit and
press the controller.
The setting is stored for the remote control
currently in use.
Service requirements
The remaining driving distance and the date of
the next scheduled service are displayed briefly
immediately after you start the engine or switch
on the ignition.
The extent of service work required can
be read out from the remote control by
your BMW Service Advisor.<
For certain maintenance operations, you can
view the respective distance remaining or due
date individually in the instrument cluster.
1. Switch on the ignition, refer to page 56.
2. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "SERVICE-INFO".
3. Press button 2.
Online Edition for Part no. 01 41 0 014 254 - © 08/07 BMW AG
To Next Page
Loading...
Need help?
General
