Controls
75
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
Settings and information
Operating principle
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 72
3 When the lights are on: instrument lighting
brightness 100
4 Calling up Check Control 81
5 Checking engine oil level 215
6 Setting the time 79
7 Setting the date 80
8 Viewing service requirement display 76
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
You can set units of measure. The settings are
stored for the remote control currently in use,
refer also to Personal Profile on page 28.
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Settings" and press the controller.
4. Select "Language / Units" and press the
controller.
5. If necessary, move the highlight marker to
the uppermost field. Turn the controller
ba8_E9293_US.book Seite 75 Montag, 6. November 2006 1:48 13
Online Edition for Part no. 01 41 0 013 015 - © 11/06 BMW AG
To Next Page
Loading...
Need help?
General
