116
1 Move the wipers to the fold-out
position: Switch on the ignition.
Move the wiper control lever to
position 1 (intermittent wipe).
Switch the ignition off again
between wiper movements. The
wipers will then move up to an
almost vertical position.
2 Lift the wiper arm away from the
glass and hold it securely.
3 For the driver's side wiper, pull the
outer spring keeper first and then
the inner one (arrow) until the
wiper blade is released. There is
only one spring keeper on the pas-
senger's side wiper.
4 Pull the wiper blade towards the
wiper arm.
When inserting a new wiper blade,
make sure that it engages securely.
312de085
Renewing wiper blades
Online Edition for Part-No. 01 41 9 790 191 - © 12/98 BMW AG
To Next Page
Loading...
Need help?
General
