53
Overview
Controls
OperationMaintenanceDataKeyword
Valid for all systems:
Unrealistic numerical inputs are not
accepted by the computer.
Each time a numerical input key (7) is
pressed the value increases by one
digit. If the key is held down, the value
increases by one every half second.
A numerical input erases the previ-
ously memorised one.
Figures can be altered and input in
any convenient order.
The value is input to the memory by
pressing the SET/RES key.
To clear the display, press the CHECK
button.
If the power supply is interrupted, for
instance when a battery is charged, all
the memorised data are erased. After
restoring the power supply the time,
date and any previously stored
switch-in times, distance and speed
limit values must be input again.
If the "PPPP" fault display appears,
consult BMW Service.
Green light-emitting diodes
The fewer are on, the sooner the next
service will be due.
Yellow LEDs
This lights up in conjunction with
OILSERVICE or INSPECTION.
comes on when service work is due.
Red LEDs
Maintenance work is overdue.
Clock symbol with INSPECTION
display
Shows that brake fluid renewal is due.
aPeriods during which the battery
has been disconnected are ignored by
the display.
Make sure that brake fluid is renewed
every two years, regardless of whether
this is confirmed by the display.
Further details: Page 99.c
All displays go out after the engine
has been started.
The BMW Service station resets the
Service Interval indicator to the origi-
nal display after the maintenance
work has been carried out.
For further details, please see Page
138 and refer to the car's Service
Booklet.
MID Service Interval indicator
Online Edition for Part-No. 01 41 9 790 191 - © 12/98 BMW AG
To Next Page
Loading...
Need help?
General
