contain alcohol, solvents or abra-
sives to clean plastic parts.
'Insect sponges' or sponges with
hard surfaces can also lead to
scratches.
Fairings and panels
Clean fairings and panels with
water and BMW plastic cleaner.
Windshields and lens are
manufactured of plastic
Clean off dirt and insects with a
soft sponge and plenty of water.
Soften stubborn dirt and
dead insects by covering
the affected areas with a wet
cloth.
Chrome
Especially in the case of road
salt, carefully clean chrome parts
with plenty of water and BMW
auto shampoo. Use chrome pol-
ish for additional treatment.
Radiator
Clean the radiator regularly to
prevent overheating of the en-
gine due to inadequate cooling.
For example, use a garden hose
with low water pressure.
Cooling fins can be bent
easily.
When cleaning the radiator, en-
sure that the fins are not bent.
Rubber
Treat rubber components with
water or BMW rubber protection
coating agent.
Using silicone sprays for
the care of rubber seals can
cause damage.
Do not use silicone sprays or
care products that contain
silicone.
Paint care
Washing the motorcycle regularly
will help counteract the long-term
effects of substances that dam-
age the paint, especially if your
motorcycle is ridden in areas
with high air pollution or natural
sources of dirt, e.g. tree resin or
pollen.
At the same time, you should
remove particularly aggressive
materials immediately; otherwise
changes in the paint and discol-
oration can occur. These include
spilled fuel, oil, grease and brake
fluid as well as bird droppings.
It is advisable to use BMW Car
Polish or BMW Paint Cleaner in
this case.
Contamination on the paint fin-
ish is particularly easy to see
after the motorcycle has been
washed. Remove this type of
soiling with cleaning naphtha or
spirit on a clean cloth or cotton
ball. BMW Motorrad recom-
10
113
z
Care
To Next Page
Loading...
Need help?
General
