Threaded fasteners
Front wheel Value Valid
Quick-release axle in axle mount
M18 x 1.5 22 lb/ft (30 Nm)
Clamping screws (quick-release
axle) in telescopic forks
M6 x 30 Tighten the screws 6 times, alternating
between one and the other each time
6 lb/ft (8 Nm)
Brake caliper on fork leg
M8 x 32 21 lb/ft (28 Nm)
Rear wheel Value Valid
Rear wheel on output shaft
M10 x 1.25 x 40 Diagonally
44 lb/ft (60 Nm)
Muffler on bracket
M8 x 30 15 lb/ft (20 Nm)
End muffler on front muffler
M8 x 30 14 lb/ft (19 Nm)
11
117
z
Technical data
To Next Page
Loading...
Need help?
General
