BMW E66 User Manual

15© BMW AG, München 01 29 0 406 372 12.2005 (Z/Z)
6. To install the connection cable and multimedia changer
Push the fabric hose AF over branches D1 and
D2.
Route branches D1 and D2 parallel to plug X275
and secure them with a cable tie AP.
Route branches D3 and D4 to the boot at the rear
left.
Push the fabric hose AF over branches E1 and
E2.
Route branches E1 and E2 parallel to plug X279
and secure them with a cable tie AP.
Route branches E3 and E4 to the boot at the rear
left.
Remove the transport safety devices (1).
Close the openings with gluing points N.
Set the position of the multimedia changer L to
“H” using the setting screws (2).
Affix information sticker AM to the multimedia
changer L.
Tie back and insulate branch L5.
Connect branches C3, C4 and C5 to the same
coloured cables on branches L1, L2 and L3 on
the multimedia changer L.
Connect branch J1 to the multimedia changer L.
AP
AF
D1
D2
X275
D3/D4
060 0751 Z
AP
AF
E1
E2
X279
E3/E4
060 0664 Z
V
1
N
N
L
2
2
AM
065 0673 Z
C4
C3
L5
C5
L2
L1
J1
L3
L
060 0674 Z

BMW E66 Specifications

General

Production years	2001-2008
Body style	4-door sedan
Width	1902 mm (74.9 in)
Engine	4.4L V8
Transmission	6-speed automatic
Compatibility	BMW 7 Series (E65/E66) models
Common Accessories	Floor mats, seat covers, car covers, navigation systems
Height	1492 mm (58.7 in)