with new fuses of the correct
amperage rating.
Switch off the ignition.
Remove the right side panel
( 98)
Check the fuse-assignment
diagram and pull the defective
fuse up and out of the fuse
box.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Fuse assignment, ABS
OE
1 ABS (30 A)
2 Spare fuse (30 A)
3 Spare fuse (20 A)
4 ABS (20 A)
Installing ABS fuse
Remove the defective fuse and
replace it with a fuse of the
correct amperage rating.
Install the right side panel
( 99)
Bulbs
Notes
A defective bulb places
your safety at risk because
it is easier for other users to
oversee the motorcycle.
Replace defective bulbs as
soon as possible; always carry a
complete set of spare bulbs if
possible.
The bulb is pressurised and
can cause injury if dam-
aged.
Wear protective goggles and
gloves when changing bulbs.
The types of bulb fitted to
your motorcycle are listed
in the section entitled "Technical
data".
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
8
85
z
Maintenance
To Next Page
Loading...
Need help?
General
