Install right adjusting plate 7.
Install quick-release axle nut 4,
but do not tighten it at this
point.
Seat the speed sensor in the
holder and install screw 3 of
the speed sensor.
Place cover 2 in position.
Install 2 screws 1.
Adjust the chain tension
( 69)
Remove the auxiliary stand.
BMW Motorrad
auxiliary stand
Installing auxiliary stand
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use the auxiliary stand with
the number (001631) and the
H adapter with the number
(001639).
8
75
z
Maintenance
To Next Page
Loading...
Need help?
General
