In order to ensure stability, the
height of the auxiliary stand
can be adjusted by means of
scissor-type lifter 5.
BMW Motorrad front-
wheel stand
Installing front wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support motorcycles not fitted
with a centre stand or without
other auxiliary stands. A motor-
cycle resting only on the front
wheel stand and the rear wheel
can topple.
Place the motorcycle on its
centre stand or another auxiliary
stand before lifting the front
wheel with the BMW Motorrad
front-wheel stand.
Place the motorcycle on an
auxiliary stand; BMW Motorrad
recommends the BMW Motor-
rad auxiliary stand.
Install the auxiliary stand
( 75)
Use the front-wheel stand with
the number (363970).
Slacken adjusting screws 1 of
the front-wheel stand.
Push the two adapters 2 apart
until the front forks fit between
them.
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
8
77
z
Maintenance
To Next Page
Loading...
Need help?
General
