Install screw 1.
Install the seat ( 38)
Clutch
Checking clutch-lever
play
Pull the clutch lever until resist-
ance is perceptible.
Measure clutch-lever play A.
Clutch-lever play
2...3 mm (Engine cold)
Clutch-lever play is out of toler-
ance:
Adjust clutch-lever play ( 67)
Adjusting clutch-lever
play
Push back boot 1.
Slacken locknut 2.
Set clutch-lever play to spe-
cification by turning adjusting
screw 3.
Turning clockwise: increases
play.
Turning counter-clockwise: re-
duces play.
Check the clutch-lever play
( 67)
Tighten locknut 2.
Pull boot 1 back over the ad-
justing screw.
8
67
z
Maintenance
To Next Page
Loading...
Need help?
General
