2. Close cap.
3. Have the cause of the coolant loss elimi‐
nated by the service center as soon as
possible.
Coolant reservoir for drive
Checking
1. Allow the drive to cool down.
2. Check the coolant level.
The marks are on the side of the coolant
reservoir. The coolant level is correct if it
lies between the minimum and maximum
marks.
Adding
1.
Turn the lid of the coolant reservoir slightly
counterclockwise to allow any excess
pressure to dissipate, then open it.
2. Slowly add coolant up to the specified
level; do not overfill.
3. Close cap.
4. Have the cause of the coolant loss elimi‐
nated by the service center as soon as
possible.
Disposal
Comply with the relevant environmen‐
tal protection regulations when dispos‐
ing of coolant and coolant additives.
Seite 187
Coolant Mobility
187
Online Edition for Part no. 01 40 2 960 865 - II/15
To Next Page
Loading...
Need help?
General
