Technical data
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.
Note
The technical data and specifications in this
Owner's Manual are used as guidance values.
The vehicle-specific data can deviate from this,
for example, due to the selected special equip‐
ment, country version or country-specific
measurement method. Detailed values can be
found in the approval documents, on informa‐
tion signs on the vehicle or can be obtained
from the service center.
The information in the vehicle documents al‐
ways has priority.
Dimensions
The dimensions can vary depending on the
model version, equipment or country-specific
measurement method.
The specified heights do not take into account
attached parts, for example, a roof antenna,
roof racks or spoiler. The heights can deviate,
for example, due to the selected special equip‐
ment, tires, load and chassis version.
BMW i3
Width with mirrors inches/mm 80.3/2,039
Width without mirrors inches/mm 69.9/1,775
Height inches/mm 62.1/1,578
Length inches/mm 157.8/4,008
Wheelbase inches/mm 101.2/2,570
Smallest turning radius diam. ft/m 32.4/9.86
Seite 206
Reference Technical data
206
Online Edition for Part no. 01 40 2 960 865 - II/15
To Next Page
Loading...
Need help?
General
