Low beams
Follow general instructions, refer to page 190.
55-watt bulb, H7.
1. Fold up cover in front of the headlights.
2. Turn the lid counterclockwise and remove.
3. Pull off the connector.
4. Press bulb holder slightly inward, loosen it
to the right from the anchor and fold it
down.
5. Turn the bulb counterclockwise and re‐
move.
6. To insert the bulb and bulb holder, proceed
in reverse order of removal. Make sure that
the bulb holder snaps into place.
7. Close the headlight housing with the lid.
Make sure that the lid engages.
LED headlights
Hints
With LED headlamps, all front lights and park‐
ing lights/daytime running lights are designed
with LED technology.
Contact your service center in the event of a
malfunction.
At a glance
1 Parking lights / daytime running lights
2 Low beams
Parking lights/daytime running lights
Parking lights/daytime running lights are de‐
signed with LED technology.
Contact your service center in the event of a
malfunction.
Turn signal and high beams
Follow general instructions, refer to page 190.
Seite 192
Mobility Replacing components
192
Online Edition for Part no. 01 40 2 960 865 - II/15
To Next Page
Loading...
Need help?
General
