BMW K 1200 R User Manual

Install screw 4 for the brack-
et of the silencer in the rear
footrest, but do not tighten it at
this point.
Align clamp 3 on the silencer
with mark A (arrow) on oxygen
sensor B.
Tighten clamp 3 on the silen-
cer to the specified tightening
torque.
Silencer to manifold
35 Nm
If the gap between the rear
wheel and the silencer is
too small, the rear wheel can
overheat.
The gap between the rear wheel
and the silencer must be at least
10 mm.
Tighten screw 4 for the brack-
et of the silencer in the rear
footrest to the specified torque.
Silencer to rear footrest
22 Nm
8
114
z Maintenance

BMW K 1200 R Specifications

General

Displacement	1157 cc
Power	163 hp (120 kW) at 10, 250 rpm
Transmission	6-speed
Compression Ratio	13.0:1
Fuel System	Electronic fuel injection
Final Drive	Shaft drive
Front Suspension	BMW Motorrad Duolever
Engine Type	Liquid-cooled, 4-stroke in-line four-cylinder
Torque	127 Nm at 8, 250 rpm
Fuel Capacity	19 liters
Seat Height	820 mm
Dry Weight	217 kg
Bore x Stroke	79 mm x 59 mm
Fuel Type	Unleaded
Clutch	Wet, multi-disc
Gearbox	6-speed, constant mesh
Frame	Aluminum bridge-type frame
Rear Suspension	BMW Motorrad Paralever
Front Wheel Travel	115 mm
Rear Wheel Travel	135 mm
Front Brake	Dual 320 mm discs, 4-piston calipers
Rear Brake	Single 265 mm disc, 2-piston caliper
ABS	Optional
Maximum Speed	Over 200 km/h