BMW K 1600GTL User Manual

Frame
Frame design Cast light alloy - welded design with screwed-on
light alloy rear frame
Location of type plate Wheel carrier, front right
Location of the vehicle identification number Frame side section, front right (beside engine-oil
filler neck)
Dimensions
Motorcycle length 98 in (2490 mm), over topcase
Motorcycle height 57.7 in (1465 mm), across windshield at DIN un-
laden weight
Motorcycle width 39.4 in (1000 mm), across mirrors
38.6 in (980 mm), without mirrors
Driver's seat height 29.5 in (750 mm), without driver
with high dual seat
OE
30.7 in (780 mm), without driver
Rider's inside-leg arc, heel to heel 67.7 in (1720 mm), without driver
with high dual seat
OE
69.7 in (1770 mm), without driver
10
151
z Technical data

BMW K 1600GTL Specifications

General

Displacement	1, 649 cc
Transmission	6-speed
Final Drive	Shaft drive
Fuel System	Electronic fuel injection
Front Suspension	BMW Motorrad Duolever; central spring strut
Front Brakes	Dual disc brakes, diameter 320 mm, 4-piston fixed calipers
Traction Control	Dynamic Traction Control (DTC)
Engine Type	Oil/water-cooled 4-stroke in-line 6-cylinder engine, two overhead camshafts, four valves per cylinder
Power	160 hp (118 kW) at 7, 750 rpm
Torque	175 Nm at 5, 250 rpm
Fuel Capacity	26.5 liters
Seat Height	750 mm (29.5 in)
Rear Suspension	BMW Motorrad Paralever
Rear Brakes	Single disc brake, diameter 320 mm, 2-piston caliper
ABS	BMW Motorrad Integral ABS (partly integral)
Wheelbase	1, 618 mm (63.7 in)