The current setting is shown at
position 2; each time the button
is pressed one of the possible
riding modes is shown at posi-
tion 3.
Repeatedly press the button
until the reading shows the rid-
ing mode you want.
With the motorcycle at a stand-
still, the mode you select is
activated after a brief delay.
The new driving mode is acti-
vated while driving under the
following conditions:
Brake not actuated
Throttle turned all the way
back
Clutch actuated
Once the new riding mode has
been activated, the selection
display disappears.
The mode selected in this way
is retained with the engine-
characteristic and DTC adap-
tation settings even after the
ignition has been switched off.
Seat
Remove the seat
Use the ignition key to unlock
seat lock 1 and lift the rear of
the seat.
4
57
z
Operation
To Next Page
Need help?
General
