To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the BMW R 1150 RS and is the answer not in the manual?
General| Displacement | 1130 cc |
|---|---|
| Bore x Stroke | 101 mm x 70.5 mm |
| Transmission | 6-speed |
| Final Drive | Shaft drive |
| Rear Brakes | Single 276 mm disc, 2-piston caliper |
| Compression Ratio | 10.3:1 |
| Fuel System | Electronic fuel injection |
| Front Tyre | 120/70 ZR 17 |
| Rear Tyre | 170/60 ZR 17 |
| Engine Type | Air/oil-cooled, four-stroke, Boxer twin |
| Power | 63 kW (85 hp) at 6, 750 rpm |
| Torque | 98 Nm at 5, 250 rpm |
| Front Suspension | Telelever with central spring strut |
| Rear Suspension | BMW Motorrad Paralever |
| Front Brakes | 2 x 305 mm discs, 4-piston calipers |
| Seat Height | 800 mm (31.5 inches) |
| Clutch | Single-disc dry clutch |
| Wheelbase | 1487 mm (58.5 in) |
Overview of motorcycle components on the left side.
Overview of motorcycle components on the right side.
Instrument cluster and handlebar control layout.
Identification and meaning of dashboard indicators.
Operation of the ignition key and steering lock.
Procedure for adjusting the windshield height.
How to operate the hazard warning lights.
Controls and switches located on the left handlebar.
Controls and switches located on the right handlebar.
Steps for adjusting the handlebar position for comfort.
Procedure for removing and adjusting the rider's seat.
Instructions for installing and removing system cases.
Pre-ride safety checklist for every journey.
How to check and maintain engine oil level.
Refuelling procedure, fuel type, and capacity.
Adjusting clutch and handbrake levers for comfort.
General checks for proper brake system operation.
Specific brake checks for non-ABS models.
Specific brake checks for ABS-equipped models.
Procedure for checking the clutch fluid level.
Ensuring all exterior lights are operational.
Adjusting front and rear shock absorber settings.
Adjusting spring preload based on load.
Checking wheel rims, tire tread depth, and pressure.
Information on approved accessories and tire recommendations.
Guidelines for correct loading and weight distribution.
Familiarization with motorcycle behavior.
Key safety precautions for operation and risks.
Proper use and retraction of the side stand.
Proper use and retraction of the main stand.
Break-in procedures for the engine and tires.
Ignition sequence and pre-ride checks.
Procedure for starting the motorcycle engine.
Explanation of dashboard indicator lights.
Functionality and displays of the Rider Information Display.
Techniques for riding and changing gears.
General advice on brake system use and maintenance.
Features and operation of the BMW Integral ABS system.
Diagnosing and resolving BMW Integral ABS faults.
Importance of technical knowledge and dealer consultation.
Information on the global BMW service network.
BMW's commitment to environmental protection.
Recommendations for rider safety and protective gear.
Details on approved BMW accessories and equipment.
The benefits and importance of rider training.
