BMW R 1150 RS User Manual

22
28
Safety check
Brake system - general
Work on the brake system

To ensure reliability have all
work on the brake systems
performed by an authorized
BMW motorcycle retailer.
Checking the brake sys-
tem

Sudden changes in play or
spongy action of the brake
lever indicate a possible
problem in the brake system.
Before riding off, therefore,
always check the resistance
of the front and rear brake le-
vers and test operation of the
brakes.
Do not ride the motorcycle if
you have any doubts about
the safety of the brake sys-
tem.
Immediately seek the advice
of an authorized BMW motor-
cycle retailer.
10rsbku2.book Seite 28 Montag, 13. Januar 2003 2:05 14

BMW R 1150 RS Specifications

General

Displacement	1130 cc
Bore x Stroke	101 mm x 70.5 mm
Transmission	6-speed
Final Drive	Shaft drive
Rear Brakes	Single 276 mm disc, 2-piston caliper
Compression Ratio	10.3:1
Fuel System	Electronic fuel injection
Front Tyre	120/70 ZR 17
Rear Tyre	170/60 ZR 17
Engine Type	Air/oil-cooled, four-stroke, Boxer twin
Power	63 kW (85 hp) at 6, 750 rpm
Torque	98 Nm at 5, 250 rpm
Front Suspension	Telelever with central spring strut
Rear Suspension	BMW Motorrad Paralever
Front Brakes	2 x 305 mm discs, 4-piston calipers
Seat Height	800 mm (31.5 inches)
Clutch	Single-disc dry clutch
Wheelbase	1487 mm (58.5 in)