BMW R 1150 RS User Manual

22
30
Safety check
Brake system - without BMW Integral ABS
Checking brake fluid level
Gradual wear of the brake pads
causes the brake fluid level in
the reservoir to drop.

If brake fluid level in the fluid
reservoirs for the front or rear
brakes has dropped below
the MIN mark (
b 31, 32) have
the brake system checked
without delay by an
authorized BMW motorcycle
retailer.
Changing the brake fluid

Brake fluid is exposed to
severe thermal loads, and
absorbs moisture from the
atmosphere.
Consequently, the brake fluid
must be changed regularly
(see the Maintenance Instruc-
tions
b Chapter 1) by an au-
thorized BMW motorcycle
retailer.
10rsbku2.book Seite 30 Montag, 13. Januar 2003 2:05 14

BMW R 1150 RS Specifications

General

Displacement	1130 cc
Bore x Stroke	101 mm x 70.5 mm
Transmission	6-speed
Final Drive	Shaft drive
Rear Brakes	Single 276 mm disc, 2-piston caliper
Compression Ratio	10.3:1
Fuel System	Electronic fuel injection
Front Tyre	120/70 ZR 17
Rear Tyre	170/60 ZR 17
Engine Type	Air/oil-cooled, four-stroke, Boxer twin
Power	63 kW (85 hp) at 6, 750 rpm
Torque	98 Nm at 5, 250 rpm
Front Suspension	Telelever with central spring strut
Rear Suspension	BMW Motorrad Paralever
Front Brakes	2 x 305 mm discs, 4-piston calipers
Seat Height	800 mm (31.5 inches)
Clutch	Single-disc dry clutch
Wheelbase	1487 mm (58.5 in)