If the oil level is below the MIN
mark:
Top up the engine oil ( 96).
If the oil level is above the MAX
mark:
Have the oil level corrected
by a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Top up the engine oil
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Wipe the area around the filler
neck clean.
Use the tool from the toolkit to
remove cap 1 from the engine-
oil filler neck.
Damage to the engine
can result if it is operated
without enough oil, but the same
also applies if the oil level is too
high.
Always make sure that the oil
level is correct.
Top up the engine oil to the
specified level.
Checking engine oil level
( 95).
Use the tool from the toolkit to
install the cap in the engine-oil
filler neck.
Brake system
Checking operation of
brakes
Pull the handbrake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.
If pressure points are not clearly
perceptible:
Have the brakes checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking front brake pad
thickness
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
8
96
z
Maintenance
ProCarManuals.com
To Next Page
Loading...
Need help?
General
