General instructions
The "Maintenance" chapter de-
scribes work involving the check-
ing and replacement of wear
parts that can be performed with
a minimum of effort.
If special tightening torques are
to be taken into account for
assembly, these are listed. An
overview of all required tightening
torques is contained in the
chapter "Technical Data".
Further information about main-
tenance and repair work can be
obtained on DVD through your
authorized BMW Motorrad re-
tailer.
Special tools and thorough spe-
cialized knowledge are required
to carry out some of the work.
If you are in doubt, consult an
authorized workshop, preferably
your authorized BMW Motorrad
retailer.
Tool kit
Onboard toolkit
1 Screwdriver handle
Use with screwdriver bit.
Topping up engine oil
( 114).
2 Reversible screwdriver in-
sert
Phillips PH1 and Torx T25
Remove bulb for front
and rear turn indicator
( 131).
Remove battery cover
( 137).
2 Topping up coolant
( 119).
3 Open-ended wrench
Wrench size: 8/10 mm
Removing battery
( 137).
4 Open-ended wrench
Wrench size: 14
Adjust mirror arm
( 78).
5 Torx wrench T30
Lower gear lever adjust-
ment.
7
112
z
Maintenance
ProCarManuals.com
To Next Page
Loading...
Need help?
General
