Exercise caution when using
high-pressure or steam-jet
devices.
NOTICE
Cases and topcases made of alu-
minum have no surface coating.
The best possible appearance is
preserved with the following care:
Remove road salt and corrosive
deposits immediately with cold
water after completing the trip.
Cleaning sensitive
motorcycle parts
Plastics
ATTENTION
Use of unsuitable cleaning
agents.
Damage to plastic surfaces.
Do not use abrasive cleaners or
cleaners containing alcohol or
solvents.
Do not use insect sponges or
sponges with a hard surface.
Fairings and panels
Clean fairings and panels with
water and BMW plastic cleaner.
Windshields and lenses are
manufactured in plastic
Clean off dirt and insects with a
soft sponge and plenty of water.
NOTICE
Soften stubborn dirt and dead
insects by covering the affected
areas with a wet cloth.
Clean with water and
sponge only.
Do not use chemical
cleansers.
Chrome
Especially in the case of road
salt, carefully clean chrome parts
with plenty of water and BMW
auto shampoo. Use chrome pol-
ish for additional treatment.
Radiator
Clean the radiator regularly to
prevent overheating of the en-
gine due to inadequate cooling.
For example, use a garden hose
with low water pressure.
ATTENTION
Radiator fins bend easily.
Damage to radiator fins.
When cleaning, ensure that the
cooler fins are not bent.
Rubber parts
Treat rubber components with
water or BMW rubber protection
coating agent.
9
155
z
Care
ProCarManuals.com
To Next Page
Loading...
Need help?
General
