Rear-wheel drive
Type of final drive Shaft drive with bevel gears
Type of rear suspension Cast-aluminum single swing arm with BMW
Motorrad paralever
Gear ratio of final drive 2.91 (32:11 teeth)
Suspension
Front wheel
Type of front suspension BMW Telelever, upper fork bridge tilt decoupled,
leading link mounted in engine and on telescopic
fork, centrally positioned spring strut supported on
leading link and frame
Design of the front-wheel suspension Central spring strut with coil spring
with Dynamic ESA
OE
Central spring strut with coil spring and expansion
tank, electrically adjustable rebound-stage and
compression damping
Spring travel, front 8.3 in (210 mm), on wheel
10
167
z
Technical Data
ProCarManuals.com
To Next Page
Loading...
Need help?
General
