Index Data Technology Repairs Car care Controls Overview
49n
Mechanical seat Head restraints
1 Backward/Forward adjustment
Pull the lever and slide the seat to the
desired position.
After you release the lever, move the
seat forward or backward slightly so
that it engages fully
2 Cushion height
Pull the lever and apply weight to or
remove weight from the seat as
required
530us151
3 Backrest angle
Pull the lever and apply weight to or
remove weight from the backrest as
required
Comply with the adjustment
instructions on page 48. Failure to
do so could result in diminished
personal safety.<
530us152
Adjustments
To adjust the angle of the front head
restraints, tilt the head restraint to the
desired angle.
To adjust the height of the front or rear
head restraints, pull the head restraint
up or push it down.
Head restraints reduce the risk of
spinal injury in the event of an
accident. Adjust the head restraint so
that its center is approximately level
with your ears.<
To Next Page
Need help?
General
