BMW XM Technology
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
High-performance drive
system
General information
The high-performance engine is comple-
mented by a powerful electric motor. With its
spontaneous response characteristics, a very
wide usable speed range results. The maxi-
mum RPM is 7,200 rpm and is electronically
controlled. Because of the high engine dynam-
ics, the maximum RPM with the vehicle sta-
tionary is reduced.
The power and torque values are as follows:
BMW XM
Power and torque val-
ues
High-performance
engine with 4.4 liter
displacement
482 hp/479 lb-
ft/650 Nm
Electric motor /194 hp207 lb-
ft/280 Nm
System /643 hp590 lb-
ft/800 Nm
BMW XM50e Power and torque
values
High-performance en-
gine with 3.0 liter dis-
placement
308 hp/332 lb-
ft/450 Nm
Electric motor /194 hp207 lb-
ft/280 Nm
System 469 hp/516 lb-
ft/700 Nm
BMW XM Label Power and torque
values
High-performance
engine with 4.4 liter
displacement
576 hp/553 lb-
ft/750 Nm
Electric motor /194 hp207 lb-
ft/280 Nm
System 737 hp738 lb-
ft/1000 Nm
Warm-up
During the engine warm-up phase, the high-
performance engine has a somewhat rougher
running behavior because of the emission con-
trols.
During the engine warm-up phase, the cold
start occurs at an increased idle speed, which
leads to increased acoustics of the exhaust
system.
Additional information:
Tachometer, refer to page 149.
Drivetrain
With this vehicle, particular value was placed
on the direct connection from engine to the
Seite 304
DRIVING TIPS
BMW XM Technology
304
Online Edition for Part no. 01405A8A608 - VI/23
To Next Page
Loading...
Need help?
General
