EasyManuals Logo

BMW XM User Manual

BMW XM
416 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #306 background imageLoading...
Page #306 background image
Things to remember when driving
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
Break-in procedures
General information
Moving parts need to work together smoothly.
The following instructions will help you to ach-
ieve a long vehicle life and good efficiency.
During break-in, do not use the Launch Con-
trol.
Safety information
Warning
Due to new parts and components, safety
and driver assistance systems can react with
a delay. There is a risk of accident. After in-
stalling new parts or with a new vehicle, drive
conservatively and intervene early if neces-
sary. Observe the break-in procedures of the
respective parts and components.
Engine, transmission, and axle drive
Up to 600 miles/1,000 km
Drive at varying engine and road speeds,
but do not exceed 5000 rpm and
106 mph/170 km/h.
Avoid full throttle or kickdown under all circum-
stances.
Use hybrid mode, i.e., drive alternating be-
tween the combustion engine and electric mo-
tor.
From 600 miles/1,000 km to
1,200 miles/2,000 km
Drive at varying engine and road speeds,
but do not exceed 6000 rpm and
130 mph/210 km/h.
Avoid full load in gears 1 to 3.
At 1,200 miles/2,000 km
Have break-in service maintenance performed.
Tires
Tire traction is not optimal due to manufactur-
ing circumstances when tires are brand new.
Drive conservatively for the first
200 miles/300 km.
Brake system
Brake disks and brake pads must be run in to
avoid possible brake noise. Drive cautiously for
the first approx. 300 miles/500 km.
Following part replacement
Observe the break-in procedures again if com-
ponents mentioned above are replaced.
Driving on poor roads
Principle
Because of its greater ground clearance, the
vehicle can be driven on a variety of road types
and qualities.
All-wheel drive can help improve drive power.
Seite 306
DRIVING TIPS
Things to remember when driving
306
Online Edition for Part no. 01405A8A608 - VI/23

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMW XM and is the answer not in the manual?

BMW XM Specifications

General IconGeneral
BrandBMW
ModelXM
CategoryAutomobile
LanguageEnglish

Related product manuals