Do you have a question about the Bosch DIVAR 3000 and is the answer not in the manual?
AC input voltage | 100 - 240 V |
---|---|
AC input frequency | 50 - 60 Hz |
Power consumption (max) | 20 W |
Storage temperature (T-T) | 0 - 93 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 0 - 95 % |
Operating relative humidity (H-H) | -40 - 70 % |
Sustainability certificates | RoHS |
Certification | EMC, LVD, UL, cUL, CAN/CSA, BIS, RCM, ACMA EMC, CE, FCC |
On/off switch | Yes |
Product color | Black, Silver |
Rack capacity | - |
Bit rate | 24000 Kbit/s |
Display modes | Live view |
Playback modes | Fast play, Forward, Frame by Frame, Reverse, Slow play |
Input bandwidth | 320 Mbit/s |
Number of users | 128 user(s) |
Recording modes | Manual, Schedule, Stop |
Output bandwidth | 256 Mbit/s |
Maximum resolution | 3840 x 2160 pixels |
Alarm input channels | 16 |
Video input channels | 16 channels |
Alarm output channels | 3 |
Supported resolutions | 3840×2160, 1920×1080, 1280×1024, 1280×720, 1024×768, 970x576, 704x576, 352x576, 352x288, 176x144, 960x480, 704x480, 352x480, 352x240, 176x120 |
Video recording modes | 720p, 1080p |
Video formats supported | H.264, H.265, M-JPEG |
RS-232 ports | 1 |
Audio RCA inputs | 4 |
Networking standards | IEEE 802.3 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Ethernet LAN (RJ-45) ports | 2 |
Supported network protocols | HTTP, HTTPS, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS/DDNS, IP Filter, PPPoE, FTP |
Copper ethernet cabling technology | 10BASE-T, 100BASE-T, 1000BASE-T |
Wi-Fi | No |
HDD capacity | - GB |
HDD interface | Serial ATA |
Maximum storage capacity | 6 TB |
Mobile operating systems supported | Android, iOS |
Depth | 323 mm |
---|---|
Width | 375 mm |
Height | 53 mm |
Weight | 4130 g |