English – 29
Adjusting support levels
The support levels can be adjusted within certain parameters. You therefore
have the option of adjusting your eBike to your personal requirements.
Creating a mode that is totally your own is not possible. You can only adjust
the modes that have been enabled on your system by the manufacturer or
the dealer. This may even be less than 4 modes.
Due to technical limitations, you cannot adjust the eMTB and TOUR+
modes. It may also be the case that a mode cannot be adjusted due to re-
strictions in your country.
The following parameters are available to you for adjustment:
– Support in relation to the basic value of the mode (within the legal specifi-
cations)
– Response behavior of the drive
– Throttling down speed (within the legal specifications)
– Maximum torque (within the framework of the drive limits)
The parameters are dependent on each other and interact. For example, si-
multaneous setting of a low torque value and high support is not possible as
a matter of principle.
Note: Please ensure that your changed mode retains the position, name and
color on all on-board computers and operating elements.
Bosch eBike Systems 0 275 U07 3en | (01.02.2022)
To Next Page
Loading...
Need help?
General
