Bosch Security System User Manual

Part II: System Commands
Turning the System On (Arming)
4998122475C Security System User's Guide
Turning the System On (Arming)
Your security system can be turned on (armed) in many
different ways, depending on the arming command
used. Arming Commands are those commands used to
turn the system on. The most basic arming command is
to arm the entire system. The simplest way to arm your
system is to enter your personal passcode or
COMMAND 1.
There are several other arming commands to turn the
system on. These are described later in this manual.
To Turn Your Security System On (Arm):
1.
Enter your passcode and press
ENTER.
2.
After you arm your system, the command center
emits a repeating beep tone,
displays Area # Area
Text is now arming…
followed by
Exit now! # seconds
remaining and counts
down the exit delay
time.

Bosch Security System Specifications

General

Brand	Bosch
Model	Security System
Category	Security System
Language	English