11/2011
(see the illustration at the beginning of this
instruction manual)
The ON / OFF switch is the main power
switch for the machine You use it to turn
on your TASSIMO machine or turn it off
completely
i
To save even more energy, the appliance
should be switched off after each use
The Start / Stop button is used to start
and interrupt the brewing, cleaning and
descaling processes
The drink adjustment buttons are for
adjusting the size of the drink you are
preparing:
(milder avor)
(stronger avor)
These LEDs light up when the T DISC has
been detected The
and
LEDs light up
individually according to whether a bigger
or smaller drink has been selected and
ash during the brewing process
F
The status LED indicates four machine
conditions:
– Steady yellow:
Machine is in standby mode
– Blinking yellow:
Machine is in the process of brewing a
drink / cleaning / descaling
– Steady red:
Error mode (for example, if the barcode
was not recognized)
– Dimmed, yellow light:
Power-save mode
¡
Wait until the Status LED F (3c) has
stopped blinking before attempting to
open the brewing unit
T
This indicator lights up when the removable
water tank needs to be relled or is not in
place
Q
This indicator lights up or blinks when your
TASSIMO machine needs to be descaled
i
Always descale your TASSIMO machine in
accordance with the instructions provided
under “Descaling” on page 15
This indicator reminds you that it is time
to replace the MAVEA MAXTRA lter
cartridge (5d)
To Next Page
Loading...
Need help?
General
