Bosch WQG233D8GB User Manual

Installation and connection en
15
1. Pull out the condensation hose
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note:When removing the con-
densation hose, liquid may leak
out of the connecting piece.
2. Push the condensation hose into
the holder.
3. Push the water drain hose as far
as it will go into the connecting
piece.
4. Insert the water drain hose into the
hose guide.
Ensure that you do not bend the
water drain hose.
5. Connect the appliance to the water
outlet.
→"Water outlet connection types",
Page16
Tip:To collect condensation in the
condensation container again (e. g. if
you change where the appliance is
located), carry out these steps in re-
verse order.

Bosch WQG233D8GB Specifications

General

Door color	Black
Door hinge	Right
Door style	Glass window door
Cord length	1.45 m
Control type	Rotary, Touch
Loading type	Front-load
Drum material	Stainless steel
Drying system	Heat pump
Product color	White
Built-in display	Yes
Reversible doors	-
Appliance placement	Freestanding
Delay start (max)	24 h
Current	10 A
Connected load	600 W
AC input voltage	220/240 V
AC input frequency	50 Hz
Energy consumption	- kWh
Energy efficiency scale	A+++ to D
Power consumption (off)	0.15 W
Annual energy consumption	176 kWh
Power consumption (left-on)	0.5 W
Cycle time	165 min
Noise level	64 dB
Drying class	A
Drum capacity	8 kg
Refrigerating medium	R290
Refrigerating medium weight	135 g

Weight and Dimensions

Depth	613 mm
Width	598 mm
Height	842 mm
Weight	56400 g
Depth with door open	1096 mm