en operation
34
5. Clean the filter mat thoroughly un-
der warm, running water and
squeeze it out by hand.
You can remove heavy soiling
carefully using a vacuum cleaner.
Do not clean the filter mat using
cleaning products.
6. Push the filter mat onto the retain-
ers.
Ensure that the cleaned filter mat
is not deformed, damaged or in-
verted when you push it onto the
retainers.
Note:You can order the filter mat
→Page29 as a spare part from
customer service.
7.
Close the base unit →Page38.
12.11 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note:Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→Page14, you do not have to regu-
larly empty the condensation con-
tainer →Page34.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "End"
¡ or during operation: .
1. Pull out the condensation con-
tainer, keeping it level.