EasyManuals Logo
Home>Bosch>Dryer>WQG233D8GB

Bosch WQG233D8GB User Manual

Bosch WQG233D8GB
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Cleaning and servicing en
39
15.3 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
ATTENTION!
Hard or rough objects may damage
the moisture sensor.
Do not use hard or rough objects,
abrasive cleaning products or steel
wool for cleaning.
Note:If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
1. Open the door.
2. Clean the moisture sensor with a
sponge.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bosch WQG233D8GB and is the answer not in the manual?

Bosch WQG233D8GB Specifications

General IconGeneral
Door colorBlack
Door hingeRight
Door styleGlass window door
Cord length1.45 m
Control typeRotary, Touch
Loading typeFront-load
Drum materialStainless steel
Drying systemHeat pump
Product colorWhite
Built-in displayYes
Reversible doors-
Appliance placementFreestanding
Delay start (max)24 h
Current10 A
Connected load600 W
AC input voltage220/240 V
AC input frequency50 Hz
Energy consumption- kWh
Energy efficiency scaleA+++ to D
Power consumption (off)0.15 W
Annual energy consumption176 kWh
Power consumption (left-on)0.5 W
Cycle time165 min
Noise level64 dB
Drying classA
Drum capacity8 kg
Refrigerating mediumR290
Refrigerating medium weight135 g
Weight and Dimensions IconWeight and Dimensions
Depth613 mm
Width598 mm
Height842 mm
Weight56400 g
Depth with door open1096 mm

Related product manuals