• Regardless of where you place your
speakers, make sure they cannot fall and
cause injuries See "Accessories"
on
page 8
• Bose
151
® speakers are not magnetically
shielded Keep them at least 9 inches
(23 cm) from any video screen or
monitor
Note: Magnets in the speakers will affecta
boat
compass Consider this in choosing a
speakerlocation,
or
make sure
to
correct for
this deviation
•
On
a boat, you can surface mount the
speakers or mount them flush to the
bulkhead (Refer to "Accessories" on
page 8)
Note:
To
flush-mount
151
speakers in a
boat, you
must
cut
a hole in the bulkhead for
each speaker
You
may
want to consulta
marine electronics installer (employed
by
most
boat
yards) before cutting
any
holes
Unpack
the
speakers
Unpack each speaker carefully Save the
carton and packing materials for possible
later use
If
either speaker appears dam-
aged, do not operate either one Repack
both speakers
in
the original carton and
notify your authorized Bose dealer immedi-
ately
How
to
hook
up
Bose®
151
speakers
CAUTION: Before making
any
connections,
turn
off
your
receiver
or
amplifier
and
unplug
it from the outlet(the
AC
power
mains)
Choose
the
speaker
cord
Be sure to use the proper gauge (thickness)
of speaker cord Standard zip cord (2-
conductor, 18-gauge wire found at electrical
and hardware stores) works for most
applications
If
your speakers will be more
than 30 feet (9 m) from the receiver or
amplifier, see the wire recommendations
under "Technical information"
on
page
11
Or check with your authorized Bose dealer
If
you decide to
run
the speaker cord
through a wall or underground, check your
local building code requirements, or contact
an electrical installer before proceeding
Note: Be sure to
cut
enough
cord
to
reach
from the receiver
to
each speaker
5
To Next Page
Loading...
Need help?
General
Weight and Dimensions
