Bose 151 User Manual

Receiver
or Amplifier
Check the
connections
Figure 3
Complete all the connections
Test the connections
Check the speaker and receiver or amplifier
connections carefully Make sure no loose
strands of wire touch across terminals This
could create short circuits that can damage
an amplifier or receiver
Tighten any loose connections before you
plug
in the receiver or amplifier
To make sure your speakers operate
correctly
1. Set your receiver or amplifier for MONO
(monophonic) and turn
it on Set the
balance control to normal (centered)
2. Place the speakers less than 6 inches
(15 cm) apart, facing each other
3. Play some deep bass passages of
music through the speakers
The sound should seem to come from a
point between the two speakers The bass
should be full and natural
If not, your
connections may be out of phase Reverse
the connections on the back of one speaker
Then repeat steps 1- 3
7

Bose 151 Specifications

General

Type	In-wall/On-wall/In-ceiling speakers
Dimensions (WxDxH)	318 x 152 x 114 mm
Speaker type	2-way
Tweeter diameter	64 mm
Audio output channels	2.0 channels
RMS rated power	- W
Product color	White
Package weight	5100 g

Weight and Dimensions

Weight	4300 g