Bose CineMate Series II User Manual

16
CONTROLS AND INDICATORS
ItalianoSvenska DeutschNederlands EnglishFrançais Español
CineMate
®
series II
remote control
The CineMate series II remote control turns the power
to your system on and off. It also controls the audio
volume.
Note: The CineMate series II remote control only
operates your CineMate series II system.
Using the remote to control the
CineMate system
When you point the remote control at the interface
module and press a button, the green LED on the
interface module flashes.
Press On-Off to turn on the CineMate system.
Press again to turn the system off.
Press Volume Up to raise the volume. When
maximum volume is reached, the green LED
on the interface module flashes twice.
Press Volume Down to reduce the volume.
When the minimum volume is reached, the
green LED on the interface module flashes
twice.
Press Mute to silence the audio. Press Mute
again to restore the audio. When the system
is muted, the green LED flashes until audio is
restored.

Bose CineMate Series II Specifications

General

Audio decoders	-
RMS rated power	- W
Audio output channels	2.1 channels
Subwoofer included	Yes
Cables included	AC, Coaxial
Receiver included	No
Product color	Black
Recommended usage	Home theatre
Remote control type	Programmable
Apple docking compatibility	Not supported
Connectivity technology	Wired

Weight and Dimensions

Weight	15630 g