Bose CineMate Series II User Manual

26
CARE AND MAINTENANCE
ItalianoSvenska DeutschNederlands EnglishFrançais Español
Replacing the CineMate
®
GS
series II remote batteries
Replace both batteries when the remote control stops
operating or its range seems reduced. Alkaline
batteries are recommended.
1. Slide open the battery compartment cover on the
back of the remote.
2. Remove both batteries.
Be sure to dispose of the batteries according to the
regulations in your area.
3. Insert two AA (IEC-R6) 1.5V batteries, or the
equivalent. Match the + and – symbols on the
batteries with the + and – markings inside
the compartment.
4. Slide the battery compartment cover back into
place.
Cleaning your speaker system
• You can clean the surface of your speakers,
Acoustimass
®
module, and interface module with
a soft, damp cloth. You can use an ammonia-free
window cleaner on a soft cloth to maintain the finish.
• Do not use any sprays near the speakers. Do not
use any solvents, chemicals, or cleaning solutions
containing alcohol, ammonia, or abrasives.
• Do not allow liquids to spill into any openings.
• The speaker grilles require no special care, although
you may vacuum them carefully, if necessary.
AA batteries (2)
Battery compartment cover

Bose CineMate Series II Specifications

General

Audio decoders	-
RMS rated power	- W
Audio output channels	2.1 channels
Subwoofer included	Yes
Cables included	AC, Coaxial
Receiver included	No
Product color	Black
Recommended usage	Home theatre
Remote control type	Programmable
Apple docking compatibility	Not supported
Connectivity technology	Wired

Weight and Dimensions

Weight	15630 g