Bose FreeSpace DS 100SE User Manual

13
Wiring the Bracket
Wire gauge requirements
From loudspeaker line wiring to bracket
Use 18 AWG (0.8 mm
2
) to 14 AWG (2.0 mm
2
) size wire only.
Krav til ledningens tykkelse
Fra højttalers tilslutning til beslag
Brug kun 18 AWG (0,8 mm
2
) til 14 AWG (2,0 mm
2
)-kabler.
Kabelquerschnittanforderungen
Von der Lautsprecherverkabelung zur Halterung
Verwenden Sie nur ein 18-20 AWG-Kabel (mit 0,8 bis 2,0 mm
2
Querschnitt.
Requisitos de calibre de los cables
Alinee el cableado del altavoz al soporte
Utilice únicamente cables de calibre de 18 AWG (0,8 mm
2
) a 14 AWG (2,0 mm
2
).
Diamètre des câbles
Du point de câblage de l’enceinte au support
Utiliser uniquement des câbles de 0,8 mm
2
) à 2,0 mm
2
.
Requisiti di spessore dei cavi
Dalla linea del diffusore alla staffa
Utilizzare solo cavi con spessore da 0,8 mm
2
(18 AWG) a 2,0 mm
2
(14 AWG).
Eisen aan de draaddikte
Van de luidsprekerbox naar de beugel
Gebruik alleen draden van 18 AWG (0,8 mm
2
) tot 14 AWG (2,0 mm
2
).
Storlekskrav för kablar
Från högtalare till konsol
Använd endast kabelstorleken 0,8 mm
2
(18 AWG) till 2,0 mm
2
(14 AWG).

Bose FreeSpace DS 100SE Specifications

General

Certification	CE, IEC 529
Product color	White
Housing material	Acrylonitrile butadiene styrene (ABS)
Recommended usage	-
Suitable for outdoor use	Yes
Driver diameter	57 mm
Woofer diameter	133 mm
Number of drivers	2
Speaker enclosure	Ported
Speaker placement	Ceiling-mountable, Wall-mountable
Audio output channels	1.0 channels
Woofer diameter (imperial)	5.25 \
Impedance	8 Ω
Sensitivity	85 dB
Frequency range	75 - 18000 Hz
RMS rated power	- W
Package weight	7700 g
Transformer taps	12.5, 25, 50, 100 W

Weight and Dimensions

Depth	216 mm
Width	381 mm
Height	178 mm
Weight	6400 g
Depth (with stand)	280 mm