25
Mounting the Bracket
Bose DS Trim Plate (accessory)
With standard steel 4" x 4"
junction box
The FreeSpace
®
DS 100SE loudspeaker can be mounted directly on
standard U.S. steel 4" x 4" junction boxes. There may be several
junction boxes available that are compatible with the FreeSpace DS
100SE wall mount bracket, but Bose Corporation only recommends
the junction boxes it has validated.
Please check pro.Bose.com for an up-to-date list of
Bose
®
validated junction boxes.
• It is the responsibility of the install
er to properly install junction
boxes to ensure the safety of the loudspeaker installation. Consult
a building professional for the proper junction box installation
methods before installing the loudspeaker.
• The junction box should be installed in such a way that it is
str
ucturally capable of supporting the weight of the loudspeaker.
A 10:1 safety weight ratio is recommended.
• Failure to properly install a junction bo
x or loudspeaker could
result in damage, injury, or death.
•Use #8-32 x 2" truss head screws (4) included
with the accessory
Bose DS Trim Plate.
U.S. 4" x 4" Standard Steel Junction Boxes
Approved by Bose
Manufacturer:
Steel City
Manufacturer:
Raco
Installation Type: Wooden Stud
Catalog Number
52151-V-1/2 & 3/4
235
8235
Installation Type: Metal Stud
Catalog Number
52151-CV-1/2 & 3/4 237
US-ONLY • KUN USA • NUR USA • SÓLO EE UU • ÉTATS-UNIS UNIQUEMENT • SOLO USA • ALLEEN VS • ENDAST USA
To Next Page
Loading...
Need help?
General
Weight and Dimensions
