12
CHARGING THE BATTERY
Connecting the USB cable
CAUTION: Use this product only with an agency-approved power supply that meets
local regulatory requirements (for example: UL, CSA, VDE, CCC).
1. Open the hinged door on the inside right neckband.
2. Plug the small end of the USB cable into the USB connector.
3. Plug the other end of the USB cable into a wall charger or computer that is
powered on.
While charging, the battery indicator blinks amber. Allow up to two hours to fully
charge the battery. When the battery is fully charged, the battery indicator glows
green. A full charge powers the headphones for up to 10 hours.
Note: The headphones do not play while charging.
To Next Page
Loading...
Need help?
General